Design and Experimental Study on Yield Improvement in Gating System for Turbine Housing.
Authors Name:
Prof. Yogini S. Jadhav
, Miss. Roshni H. Bajgude , Miss. Prerana R. Gore , Miss. Priyanka P. Lonkar
Author Reg. ID:
IJNRD_170062
Published Paper Id:
IJNRD1706002
Published In:
Volume 2 Issue 6, June-2017
Abstract:
Casting is a one of the economical manufacturing processes used in foundries. There are two important stages in casting, first is filling process and second is solidification process. Casting Yield is usually defined as the total weight of acceptable castings to the total bunch weight of the gating system which is expressed in percentage. The aim of the project is to optimize gating and risering systems of turbine housing component based on CAD and simulation technology with the goal of improving casting quality and increasing casting yield. Initially the match plate contains four mold cavities and each mold cavity contains single riser. In this project, we modified the design of the gating system in which the mold cavity contains only two common risers instead of four. Modeling of gating system is done in ProE software and the analysis is done in ProCAST Simulation Software and also Radiography test is performed to check whether the casting is defective or not.
"Design and Experimental Study on Yield Improvement in Gating System for Turbine Housing.", International Journal of Novel Research and Development (www.ijnrd.org), ISSN:2456-4184, Vol.2, Issue 6, page no.12-19, June-2017, Available :http://www.ijnrd.org/papers/IJNRD1706002.pdf
Facebook Twitter Google+ Pinterest LinkedIn